PSI LLC. - Jail & Prison Equipment Fabrication
Access Doors, Food Passes, Pass Throughs & Vault Doors
Prison Tables, Stools, Desks, & Benches
Bunks & Accessories
Security Gun Cabinets
Steel Safety Shelves
Detention Accessories
Custom Prison Products
Request for Quote

Prison Cell Furniture - Cell Desks

IDK-200
INSTITUTIONAL CELL DESK

INSTITUTIONAL CELL DESK

Top: 10 ga formed steel top 30” wide x 15” deep with a 1 1/2” flange formed up in back, & down in front
Sides: 10 ga formed steel sides,
15” deep x 30” high with 1 1/2” flange formed front & back
Each leg to floor to have a 2”x2”x7 ga steel mount plate with a 1/2” dia hole for bolting to floor
1 ” dia pipe foot rest
Shelf: Two 10 ga steel shelves, 10” deep, x 10” high x 10” wide
Seat: One 12” dia x 1 1/2” deep x 14 ga stainless steel seat, with a 7 ga steel plate welded to underside
Swing Bracket: Two 2x2 steel swivel blocks with oilite bushings, welded to
a 2x2 steel reinforcing tube. Swivel pin is a 3/4” dia steel pin, encapsulated on each end with the swivel blocks.
Swing Arm: 3/8” thick steel plate, welded to pivot pin, & seat reinforcing
plate
Finish: Chemically degreased, with 1 coat rust inhibitive primer
Options: 12 ga stainless steel top w/ #4 finish
3/8”x2 1/4” x 12” long steel towel bar


WDK-200
WALL MOUNTED PRISON CELL DESK

Wall Mounted Cell Desks

Table top: 10 ga formed steel top 30” wide x16” deep w/ 2” flange formed front and back
Sides: 10 ga steel sides, formed down from top, 8” high, creating a 1 piece structure with the top, sloping to 2” at the front edge
All corners fully welded& ground smooth
Finish: Chemically degreased, with 1 coat rust inhibitive primer
Options: 12 ga stainless steel top w/ #4 finish
15” w x 18” d with 12”x18” seat
Custom sizes available
embed plates


FCD-200
WALL MOUNTED FOLDING PRISON CELL DESK

WALL MOUNTED FOLDING CELL DESK

Function: Desk folds up to save valuable space in a handicap cell
Body: 10 ga formed steel body
28” wide x 20” high & 6” deep formed to create a pocket for the writing surface, & a book shelf
Writing surface: formed 10 ga steel pan
28 ” wide x 16” deep x 1 1/2” thick pivots on 2- 1/2” dia pins with oilite bushings
Latch: Galvanized finger pull snap latch, centered in door
Finish: Chemically degreased & 1 coat rust inhibitive primer
Options: Enamel finish paint
Contact us today to learn more about our cell desks, steel tables, and other prison furniture.

Mailing Address:
PO Box 293
Rogers, MN 55374
Street Address:
14200 James Road
Rogers, MN 55374